May 16, 2020 By Mark
Whether a door or window, making a replacement that lasts is important. This is especially for when you’re choosing timber as your material. Therefore, it’s essential to know how to identify the right timber for your windows. And that, I have explained on this blog. Right here, you’ll find the best types of timbers and learn when to use each of them.
If you’re looking for aesthetics and easy workmanship, this is the best for you. European Redwood timbers are reasonably soft, allowing the easy penetration of nails. They also add natural beauty to your window elements and are resistant to insects and decay. European Redwood can last for 5-10 years when used for windows or doors. And owing to their softness, make use of shorter nails and hammer carefully when working with them to avoid damage. Finally, if you live in the temperate region, European Redwoods are also resistant to warping and shrinking.
This is for your commercial windows or windows that are meant to bear their own load together with imposed loads. AccoyaⒸ timbers are special timbers that have been engineered for the highest durability and strength. A typical AccoyaⒸ window will last for up to 50 years or more. This is because the timber is treated with acetic acid under high pressure for stabilization and preservation of the inner and outer core of the timber. The only downside is that AccoyaⒸ is highly tough and requires a lot of effort when driving nails through it.
Like a regular mahogany timber, Sapele Mahogany brings balance to strength, durability, and ease of workmanship. In other words, it is reasonably strong while allowing easy penetration for nails. It does not contain chemicals that may react with wood-bund and thus, it is ideal for making windows with a lot of hardware. Or for making windows where timber is used together with other materials. Also. the red-brown color of Sapele Mahogany adds natural beauty to your home.
Siberian Larch contains nature-given anti-termite chemicals whilst having its own strength. If you live in a swampy area or an area surrounded by anthills, this is for you. Siberian larch is also one of the toughest wood in the word and it is quite resistant to decay.
Finally, Red Grandis is another option to make windows that are resistant to termites. Red Grandis is recognized to last for 10 to 15 years. It is grown in South America and is identified for great consistency in appearance and color.
May 10, 2020 By Mark
Timber is a nature-given material with a lot of benefits for buildings and other constructions. It has a large strength-weight ration that puts it in the category of materials with the highest capacity to bear their own loads along with other imposed loads. That alone has found timber a primary application in major constructions as well as both secondary and tertiary uses. And when it comes to the secondary application of timber, the first two structures that come to mind are windows and doors. But how timber windows are created from forest may be intriguing to the layman. That is exactly why I have explained the process in this 5 minutes post.
How Timber Gets From Forest To Your Merchant
- Felling; when an economically matured tree, usually between 40-120 years old, is spotted, the feller uses a felling buncher to fell the tree. At the end of this stage, the tree becomes a log.
- Transportation; the log is eventually left on site and the water content is allowed to evaporate over time. After a short period, the log is split into smaller pieces for transportation to the sawmill or a pallet.
- Cutting; in the sawmill or in a window production factory, the split log is finally shaped into boards and the required sizes for window making with the use of bandsaw or circular saws.
- Seasoning; finally, the timber is seasoned to remove the existing cell water and free water to make it workable for window construction.
Manufacture Of Timber Windows
Now that you have your timber and other needed tools, here is a breakdown of how to make timber windows.
- Pick a design; there are varieties of window designs you can try out. From tilting window to casement window through sliding and pivoting windows. You just have to be decisive about the design you want.
- Measurement; carefully measure the window space from the outside to the inside with the use of a rule. And also measure the dimension of the window space from length to width through breadth. After that, buy 2” thick firm timber in the thickness you have just recorded and cut into the window space dimension.
- Sand; with a 120 grit sanding paper in your sanding system, prep the sized timber for a smooth surface.
- Fix; finally, by following your desired design, join the sized sanded parts with nails and glues. Hardware should be installed in special windows like sliding or sash.
- Paint or spray; for aesthetics purpose and to make your window last longer, spray or paint mildly then heavily with a quality coat applied using a pressure sprayer.